Final check of the settings

    1
    Move all presser feet manually to their uppermost position.
    2
    Switch power supply 40 Volts on (1).
    3
    Carry out a presser foot reference run. For this, tap the button (2).
    4
    Switch the presser foot on. For this, tap the button (3).

  		1.

    ON

    The presser foot is activated.
    The arrow shows towards the needles.

    OFF

    The presser foot is deactivated.
    The arrow shows away from the needles.

    2. 5
    Check the distance between the presser foot and the needle bed with the feeler gauge.
    6
    Carry out this check with every presser foot.