Accelerate and slow down a yarn carrier while preserving the yarn
If a delicate yarn is used it may become necessary to decrease the carriage speed for this yarn, i.e. for the yarn carrier. The production speed will not be reduced.
Example: Y-2A:V1;
|
Up to now |
V1, V2, V3 The speed of the yarn carrier when it moves into the knitting area. |
|
New |
More speed specifications are available: V4, V5, V6 The speed of the yarn carrier when it moves into the knitting area and when it leaves the knitting area. |
If you work with one of the following commands, the speed from the carriage reversal (1) until reaching the knitting area of the yarn carrier is reduced to 70%. Then it can be chosen between the following options:
|
Sintral command |
Description |
|---|---|
|
Y-1A:V1; |
Acceleration to 100 % carriage speed |
|
Y-1A:V2; |
Reduce speed to 50%, keep speed over a knit fabric width of 1 inch, accelerate to 100% |
|
Y-1A:V3; |
Reduce speed to 50%, keep speed over a knit fabric width of 2.5 inches, accelerate to 100% |
|
Y-1A:V4; |
Acceleration to 100 % carriage speed If the yarn carrier leaves its knitting area, then the speed is reduced from 100 to 70%. |
|
Y-1A:V5; |
Reduce speed to 50%, keep speed over a knit fabric width of 1 inch, accelerate to 100% Before the yarn carrier leaves the knitting area (1 inch) the speed is reduced from 100 to 50%. |
|
Y-1A:V6; |
Reduce speed to 50%, keep speed over a knit fabric width of 2.5 inches, accelerate to 100% Before the yarn carrier leaves the knitting area (2.5 inches) the speed is reduced from 100 to 50%. |
|
Y-1A:V0; |
Deactivation of yarn carrier-specific carriage speed |