Yarn carrier corrections for the right carriage with tandem machines
I. Yarn carrier corrections for the right carriage:
- CMS 822 HP: Tandem mode without comb and clamping / cutting
Possible reasons for a correction:
- different wear of the yarn carriers used in the left and right carriages
- different directions of the yarn feed in the left and right carriages
- different lubrication
II. Enter the yarn carrier correction:
- You are signed in as Senior Operator
. - A knitting program is loaded.
- The production was started.
- 1
- In the main navigation bar select
Set-up Order. - 2
- Tap on
Prepare Machine in the bottom navigation bar. - 3
- Open the Setup Editor with the
button. - 4
- Then, press the
Yarn carrier button. - 5
- In the menu open the
tab.
- The table with the yarn carriers in use is displayed.
| ||
Y | Yarn carrier designation
| |
Oa | Offset specification for the yarn carrier Y to be corrected, for the left parking position in the right carriage | Min. value: -8 |
Ob | Offset specification for the yarn carrier Y to be corrected, for the right parking position in the right carriage | |
Comment | Description | |
- 6
- Tap in the field of the yarn carrier to be corrected.
- 7
- Enter the value via the virtual numeric keypad.
These correction values are machine-dependent!
The values are not deleted with EALL and when reading-in a new operating system.
The correction values must be deleted manually.