Carriage

Setting the carriage speed for specific knitting situations.

Reduced Speed
70 % of the Speed

Reduction of normal speed to preset percentage, for example with setup and checking work steps.
Default: 70 %

Reduced Speed after Stop

Following a machine stop, the machine runs for several knitting rows at reduced speed.

Speed Outside the Knitting Area

Speed outside of the knitting area.

Once the knitting process has been completed, the carriage accelerates to the maximal speed (MSECOS). The speed is reduced while reaching the clamping and cutting bed.

Speed with Open Covers

Carriage speed with open covers, for example with setup and checking work steps.

If the covers are open the engaging rod cannot be locked into its highest position (production). The user must hold the engaging rod in this position so that the machine works at the set speed MSECCO (dead man's switch).

Key inactive = the carriage moves at production speed.

After the reversal point, the carriage can move at higher speed, if it is set up that way in the knitting program.

Key active = the carriage moves with reduced speed.

Opens the dialog box to adjust the carriage speed with open covers.
(Value range: 0,00 to 0,20 m/s, Default: 0,05)