Setting: Stitch Length

The stitch length is essentially decisive for the stitch appearance of the knitwear.

The longer the stitch is, the looser will be the fabric.
The shorter the stitch is, the tighter will be the fabric.

The stitch length depends on:

Yarn Quality
Structure / Binding / Knitting technique

Call up the stitch length table and change the values

You are signed in as Senior Operator .
The knitting program is loaded and the production was started.

1: In the main navigation bar Set up Order is selected.

2: Select Set-up pattern in the bottom navigation bar.

Open the Setup Editor with the button for changing the stitch length in the front needle bed
Open the Setup Editor with the button for changing the stitch length in the rear needle bed

3: Change the values.

4: Close Setup Editor with the Close button and return to Set-up Pattern.

The changed values are in Setup and will be stored together with the order when saving it.

- or -

5: In the main navigation bar select Produce Order.

6: Open Monitor production in the bottom navigation bar.

7: Tap the key.

Change the value via the number field.


Table 1
NPK	Stitch cam correction for all stitch lengths (NP) used within the pattern
Value	Input of desired correction	Min. value: -2 Max. value: 2 Step width: 0.05
Comment	Description of NPK value

Table 2
NP	List of all the used stitch lengths (NPn)	n = 1-250
Value….	Input of desired stitch length value	The value range depends on the gauge
MC-NPK…	Machine specific NP correction values Input of correction values not to be applied to other machines. These values are saved and kept by the machine. These values cannot be transferred to other machines by the Setup file. You can delete these values by EANP (Loading Options) when creating a new order. You can set all entries to one value or to =0 (zero) by click on the table header MC-NPK....	Minimum value: -2 Maximum value: 2 Steps: 0.05 Dongle Data On the machine only!
Comment	Description of NP value