Setting: NPJ with Fully Fashion
Working with NPJ:
Each stitch tension value is assigned to the knitting needles in the pattern via a Jacquard symbol in an additional Jacquard (PANP).
In the Sintral is specified the assignment of Jacquard symbols to the indirect NP specification. The NP values appear in Setup.
Sintral specification: NPJ
- NPJ1: Indirect stitch tension specifications for the front needle bed.
- NPJ2: Indirect stitch tension specifications for the rear needle bed.
- Specification for the Point jacquard symbol .=12.0 : Direct input of a stitch length for the . symbol
(must be defined as safety information for possibly not defined symbols in jacquard). - Change of the stitch length values (stitch tensions) in Setup.
Call up the stitch length table in Setup
- You are signed in as Senior Operator
. - The knitting program is loaded and the production was started.
- In the main navigation bar
Set up Order is selected.
- 1
- Select
Set-up pattern in the bottom navigation bar. - 2
- In the window tap the button with the
or the 
symbol.
- The Stitch Length menu in the Setup Editor is opened.
- 3
- Change the value.
- 4
- Close Setup Editor with the
Close button and return to Set-up Pattern.
- The changed values are in Setup and will be stored together with the order when saving it.
- or -
- 5
- In the main navigation bar select Set-up Order.
- 6
- Open
Prepare Machine in the bottom navigation bar. - 7
- Tap the button with the
symbol.
- The Stitch Length menu is opened in the Setup Editor.
- 8
- Change the value via the number field.
