Changes in version 1.4[Outdated translation - Switch to English or German]

The most important changes in this version:

• Command MSECC=n.nn:
  Carriage speed outside the needle bed when the yarn carrier is brought in the clamp or taken out of the clamp. (Chapter Speed specifications)
• Command =WC(n)=: Releasing the fabric.
  Up to now: The waiting time is the opening time of the take-down.
  New: The waiting time is the time of the carriage standstill. During the waiting time, the fabric is re-tensioned. (Chapter Additional commands for machines with comb take-down)
• Command =^=(n): The value range has been modified.
  Up to now: The delivering position (comb take-down - fabric take-down) is n (0-25) millimeters lower than the standard setting.
  New: The delivering position can be set higher by n millimeters (0...-22) or deeper (0...25) than the standard setting.
  For the CMS 730 S, the delivering position can only be set deeper. (Chapter Additional commands for machines with comb take-down)