Changes in version 1.6[Outdated translation - Switch to English or German]

Software version:

• OKC: V_OKC_002.000.000_STOLL
• M1: M1plus V. 5.0

The most important changes in this version:

• Command =0=
  Up to now: Comb moves to the lower limit switch.
  New: Opening of the comb hooks, comb moves to the lower limit switch (Chapter Additional commands for machines with comb take-down)
• Command =H=
  Up to now: Opening the comb hooks
  New: Opening of the comb hook, comb stops. (Chapter Additional commands for machines with comb take-down)

Commands for CMS 730 S, CMS 830 S:

• Knitting specifications (CMS 730 S, CMS 830 S)
• Stitch cam settings (CMS 730 S, CMS 830 S)
• Switch units on/off

Supplements and corrections:

• Command Y-CR0 and Y-CR1: The specification "remains active after EALL" is wrong, the right one is: "deleted automatically with EALL" (chapter Clamping and cutting)
• Command Y-1A:U=m-o: Adjust the engaging width when plating with normal yarn carriers.
  The specification is no Sintral command, that's why it has been deleted in the pocket card. The engaging width is set on the knitting machine in the menu "Yarn carrier".