Yarn Carrier (ADF)

YGX: n , n / n , n ;

Yarn carrier - home position (n=1-16)
, - separates between the yarn carriers
/ - separates between the left and the right side

YGCX: n , n / n , n ;

Yarn carrier - home position (the yarn carrier is allocated to the clamping position with the same number) (yarn carrier 1 - clamping position 1, yarn carrier 2 - clamping position 2, etc.)
, - separates between the yarn carriers
/ - separates between the left and the right side

YGX m : n , n / n , n ;

Yarn carrier - home position for piece m (m=1-4)

YGX: n F;

Yarn carrier n (1-16, A-Z,.,+,*) stops after EAY or S0Y at #L, #R

YGX: n = m ;

Assign yarn carrier to a symbol (yarn type);
n (1-16), m (A-Z,.,+,*)
, - separates between the yarn carriers

S0Y

Empty courses until all yarn carriers are in YG-position

YX: n ;

Yarn carrier specification n (0-16, A-Z,.,+,*)
, - separates between the yarn carriers
Example: YX:1,2,15,=A,1B;

Y:= n ;

Yarn carrier type n (A-Z,.,+,*)

YX-1A:= n ;

Change yarn carrier type n (A-Z,.,+,*)

YX: n R;

The yarn carrier moves opposite to the carriage direction

YX: n S;

Yarn carrier n follows the selected needles

YX: n Q;

The yarn carrier n is used as an weft yarn carrier (1 row)
Example:
YX:=GQ; (Yarn type G)
YX:4Q; (weft yarn carrier 4)
YX:4QS; (the weft yarn carrier 4 follows the selected needles)
YX:4QH; (The weft yarn carrier 4 returns to HOME position)

YX: n H;

The yarn carrier n returns to HOME position

Y-1A:PI n ;

The plating index n is allocated to the yarn carrier 1A (n=1-100)
(Inverse Plating between the systems)

Plating index (Setup2)
Defines the distance between the yarn carrier and the normal yarn insertion position in the needles and the insertion angel.

Y-1A:PW: m =PI n , m =PI n ;

Jacquard-controlled plating indication
The yarn carrier 1A changes the insertion position depending on the jacquard symbols
Example:
Y-1A:PW:A=PI1, *=PI2;
m - Jacquard symbol from PAI (A, *)
n - Plating index (n=1-100)

YX: n P;

The yarn carrier n is used as a plating yarn carrier
Inverse plating in one system (Stoll-ikat plating®)

also possible:
YX:nP!; The plating yarn carrier n is stopped outside of the SEN area.
YX:nPK; The plating yarn carrier n is knitting, and will finally be clamped, and cut

Y-1A:K<I> n - m ; ¹

Correction value for yarn carrier 1A if the autarkic yarn carrier is positioned in its own color field.
(n=left, m=right)
Value range: -120...0...120.
Step width: 0.5=1/32 inches=0.8 mm

Y-1A:KI n - m ; ¹

Correction value for yarn carrier 1A if the autarkic yarn carrier is positioned outside its own color field.
(n=left, m=right)
Value range: -120...0...120.
Step width: 0.5=1/32 inches=0.8 mm

Y-1A:K0; ¹

Deletes yarn carrier correction for yarn carrier 1A

Y-1A:0;

Yarn carrier 1A switching off of selected function (correction values are reset to the default values)

Y-1A:HL m ;

Yarn carrier 1A moves on the left to position m (0-2).
m=0 means back to the HOME-position

Y-1A:HR m ;

Yarn carrier 1A moves on the right to position m (0-2).

Y-1A:HL m G;

Yarn carrier 1A moves on the left to position m (0-2). This position becomes the new home position.

Y-1A:HR m G;

Yarn carrier 1A moves on the right to position m (0-2). This position becomes the new home position.

Y-1A:F1AY;

Yarn carrier 1A follows symbols AY in field 1; max. F1-F4 and max. 8 symbols per yarn carrier.
The specifications can be entered one after another, but the field must be the last specification, e.g.: Y-1A:I< K10-8 F1AY;

Y-1A:F1AY^0;

The home position of the yarn carrier is only dependent on field 1, regardless of the racking position (e.g. for a very large racking).

YX: n !;

Yarn carrier n is stopped outside the SEN area.

Y-1A:=1;

Yarn carrier yarn type in action

Y-1A:=0;

Yarn carrier yarn type out of action

#G

Memory of yarn carrier whose current position is not in agreement with the YG

#Y n

Memory for number of yarn carriers of a yarn type n (A-Z,.,+,*) in the current carriage position

()

Brackets to repeat information, e.g.: Y:10(2/3/3) 8(4/5/5);

Y-1A:MSEC= n.nn

If yarn carrier 1A is used, then the carriage speed is n meters / second (0.05 - 1.2; 0.00=switch off)

YD n = m - o ¹

Yarn carrier distance on track n (1-16) from the left (m) and right (o) hand fabric selvedge
m,o=0-160
Step width: 0.5=1/32 inches=0.8 mm

Not active when a YD specification was made for a single yarn carrier (Y-1A:YDm-o).

Y-1A:YD m - o ;

Distance from yarn carrier 1A from the left (m) and right (o) hand fabric selvedge.
m,o=0-160
Step width: 0.5=1/32 inches=0.8 mm

also possible:
Y-1A:YDm; Distance from the left fabric selvedge
Y-1A:YD-o; Distance from the right fabric selvedge

YDF= n ¹

Additional yarn carrier distance n (1-20 needles) during fully fashion knitting

Y-1A:W n ;

Additional yarn carrier distance n (0-999 needles) during fully fashion knitting. The yarn carrier is put in a waiting position outside the fabric selvedge. The reference point is the HOME position of the yarn carrier.
The yarn carriers will not follow the fabric edge during narrowing.
The function is switched off when the yarn carrier is reused.

YD

Yarn carrier staggering process (default setting)
Distance of the yarn carriers from the left and the right fabric selvedge (track 1 to 16 = YD1 to YD16)
Value range: 0-160. Step width: 0.5=1/32 inches=0.8 mm

YDI n

Further yarn carrier staggering processes on the left and right hand fabric selvedge (n=1-20)
Value range: 0-160. Step width: 0.5=1/32 inches=0.8 mm

YC

Yarn carrier corrections for all yarn carriers (default setting)

YCI n

Further yarn carrier corrections (n=1-20) for all yarn carriers
0 = Factory settings are effective

Y-1A:A<>;

The yarn carrier 1A will be defined as autarkic yarn carrier.
The yarn carrier is positioned in its own color field.
<> = in both carriage directions
< = in the carriage direction to the left
> = in carriage direction to the right
without specification = the yarn carrier is parked outside its own color field (normal positioning)

Y-1A:Ap<>;

The yarn carrier 1A will be defined as autarkic plating yarn carrier.
p = Plating yarn carrier
The yarn carrier is positioned in its own color field.
<> = in both carriage directions
< = in the carriage direction to the left
> = in carriage direction to the right
without specification = the yarn carrier is parked outside its own color field (normal positioning with YPI value)

Y- n :MAK[<JA< m- >];

Yarn carrier run outside the knitting systems.
The yarn carrier follows the jacquard symbol with yarn carrier correction specifications. (Condition: Y-1A:F1AY; is determined.)
Correction specifications: Y-1A:KIn-m; and Y-1A:K<I>n-m;
The run is possible: before the stroke, between the systems, after the stroke.
>, < = run direction
<m-> = decrease Jacquard m (1-8)
<m+> = increase Jacquard m (1-8)

Y- n :MAE[ o JA< m- >];

Run of the yarn carrier vertically o (- = insertion position, ^ = high position, v = deep position)
The yarn carrier follows the jacquard symbol. (Condition: Y-1A:F1AY; is determined.)
The run is possible: before the stroke, between the systems, after the stroke.
<m-> = decrease Jacquard m (1-8)
<m+> = increase Jacquard m (1-8)