Upgrade OKC6 or EKC1 to EKC2

Operations at a glance

1

Copy the current EKC operating system to an USB memory stick, V_EKC_002.000.000_STOLL (or higher)

2

Save the OKC machine data

Save the EKC machine data

3

Replace cables (Display - Control cabinet)

Replace electronic card

4

Load machine data

Install EKC operating system

Save the OKC machine data

Preliminary Remarks:

Saving the OKC machine data:

  1. The current EKC operating system is located on the USB memory stick.
    1
    Insert this USB memory stick into the USB socket on the display.
    2
    Call up Copy service data window.
    (Path: Service -> Copying service data)

    3
    Select the drive F (USB memory stick).
    4
    Tap on the key Copy Logfiles.
  1. The data will be copied on the USB memory stick.
    2. 5
    If the knitting machine is connected, then note the settings in the "Local Area Network" field.
    (Path: Service --> Diagnostics --> System Info)

Note about the various report data!

Only the entire report is saved.
The specific data for a period of time and for the individual shifts are lost.

Save the EKC machine data

Preliminary Remarks:

Saving the EKC machine data:

  1. The current EKC operating system is located on the USB memory stick.
    1
    Insert this USB memory stick into the USB socket on the display.
    2
    Call up the 로그파일 window.
    유지보수 기계 -> 서비스 -> 로그파일

    3
    Select the drive F (USB memory stick).
    4
    Tap on the button 로그 파일 내보내기 (현재 편직 프로그램 포함).
    로그 파일 내보내기 (현재 편직 프로그램 포함)
  1. The data will be copied on the USB memory stick.
    2. 5
    If the knitting machine is connected, note down the settings.
    You will find the values in the 기본 설정들 menu.
    보기 데이터 -> 시스템 정보 -> 일반.

Note about the various report data!

Only the entire report is saved.
The specific data for a period of time and for the individual shifts are lost.