Setup Mode
This function is only active, if the order consists of two or more positions (knitting programs).
The setup mode serves for fine tuning the individual positions on the machine. For example:
- Set cycle counters
- Adapt WM values and stitch length
- Determine YLC data, when working with a yarn length measuring device (YLC).
기본 조건을 결정
You can set up one position after the other. In the setup mode the piece counter is automatically set to "1".
- If the fabric is finished, the machine stops (piece counter at 0).
- The message box is opened.
- The message 모든 편직 완료 is displayed.
- Tap on the icon 모든 편직 완료.
- The 설정 모드, 위치 종료됨 menu appears.
- You can select one of the following options:
|
|
To control the fabric, tap this button. |
| Exiting the setup mode. You release the order for production. Then you can release the order for production, |
| The current piece is knitted once again. If necessary, you can repeat this several times. |
| 순서의 다음 위치 (편직 프로그램)로 전환하십시오. |
The fabric is pressed off if a knitting program with comb start is used.
