Monitor the production with one knitting program

Monitor Production:

  1. You are signed in as Senior Operator .
    ထုတ္လုပ္မႈကို ေစာင့္ၾကည့္ပါ can also be performed by the Operator.
  2. An order is set-up and started.
    1
    In the main navigation bar select the main area Produce Order.
    2
    Tap Monitor production in the bottom navigation bar.
  1. The window for Monitoring the currently knitting fabric is displayed.

No.

Key

 

1

 

Display of the running time per fabric piece still nn of xx with progress display (green bar)

  • nn : Remaining running time of the fabric piece
  • xx : Total running time of the fabric piece

2

Completed on

Completion of the current position (plus re-knitting of fabric pieces)

  • Date
  • Time of Day

3

Carriages

Current carriage speed m/s with display of

  • carriage direction toward left / toward right
  • Display of with the activated Reduced speed [ML] button

4

Fabrics of Position z

    n of m

Display of the number of fabrics per position z (knitting program) in the run-through n of m

  • z = Position number = Sequential number of the knitting programs of the order
  • n = Number of completed fabrics of the current position
  • m = Total of fabrics to be knitted per position (knitting program)
  • + x = Number of fabrics to be re-knitted of the current position

: If several knitting programs are 'running through', the display corresponds to the piece counter for the corresponding position (knitting program).

5

Cycle Counters

Display of the current cycle counter RSn = x / y

  • n : Number of the cycle counter
  • x : still remaining repetitions
  • y : total number of repetitions

6

Racking

Display of the current racking position

7

Take-down

Display of the current take-down value

8

Auxiliary Take-down

Display of the current speed of the auxiliary take-down

9

Stitch Length

Opening the dialog for changing the current stitch length

10

Yarn Carriers

Opening the Yarn carrier window with the graphic representation of the active yarn carrier

11

Yarn Length Control

+display of the operating mode

Only in case of connection of ASCON devices!!!

Display of the current operating mode. of the yarn length measuring device ASCON (YLC)

Operating modes:

  • Production without YLC: --
  • Working with mm: MM
  • Working with original fabric: MP (Master Piece)
  • as specified by Sintral: Sintral

 

    3
    Tap the desired button to change the corresponding value.
  1. The changes will be entered in Setup.