Set the piece number and the run-throughs and start the production

Set the piece counter per position and quantity of run-throughs:

  1. You are signed in as အႀကီးတန္း စက္ေမာင္း .
    1
    Select the main area ေအာ္ဒါ သတ္မွတ္ရန္ in the main navigation bar.
    2
    Tap on ေအာ္ဒါ တည္းျဖတ္ရန္ in the bottom navigation bar.
  1. The window with the loaded knitting programs is displayed.

1

Enter the piece number for a position (knitting program).

: Input via virtual numeric keypad.

2

Enter the quantity of run-throughs (all listed knitting programs):

  • Reduce quantity
  • Increase quantity

    3
    Tap into the area under (1) and enter the desired piece number per position via the virtual numeric keypad.
    4
    Enter the desired quantity of run-throughs at (2)
  1. If the number is > 1, the repetition is represented graphically with a loop (run through).
    5
    Then start the production with the ထုတ္လုပ္မႈ စတင္ပါ button.