Modify the Setup file of a non active position (knitting program)

Starting situation:

The order consists of several positions (knitting programs). Every position has its own, separate Setup file (.setx). This means: No Master Setup will be used.

The production was started - the first position is knitted (1).

Problem:

A modification should be carried out in a non active, so waiting, Setup file during the production.

Solution:

    1
    Select the non active position (2).
    ( ေအာ္ဒါ သတ္မွတ္ရန္ -> ေအာ္ဒါ တည္းျဖတ္ရန္)
    2. 2
    Tap the button (3) of the non active position.
  2. The Pattern Preview will be opened.
    3. 3
    Tap the tab (4).
    4. 4
    The Setup Editor appears.
    5. 5
    Execute the modification and confirm entries with   သံုးပါ.
  1. Close the Setup editor, for this, tap the button  ပိတ္ရန္.

If the whole order is finished and you tap on the button  ထုတ္လုပ္မႈမွ ထြက္ပါ, you will get asked if the modification should be saved.