Racking

V<n

Rear needle bed racks n needles to the left (n=1,2,3...)

V>n

Rear needle bed racks n needles to the right (n=1, 2, 3...)

V0

Racking to position 0, home position

VRn

Racking to position n on the right, e.g. VR1

VLn

Racking to position n on the left

V#

Half racking

VU

Transfer racking (knitting and transfer)

VKn>m ¹

Racking correction n (A-Z) by m steps (0-10, ?) to the right
? = special function for setting the racking correction on the machine
0 = switch off correction

VKn<m ¹

Racking correction n (A-Z) by m steps (0-10, ?) to the left

VKn

Racking correction identical to previous correction n (A-Z)

V+n

Additional to racking specification: Racking will make an extra movement of n value (1-24) and then return immediately.
Without a racking specification: Racking will make a movement of n value (1-24) to the right and return immediately

V-n

Additional to racking specification: Racking will make an extra movement of n value (1-24) in the opposite direction and then in racking position
Without a racking specification: Racking will make a movement of n value (1-24) to the left and return immediately

VV=n

Racking speed n (1-32), without any specification VV=32

VJA^1

The Jacquard selection on the rear always begins at the first needle, irrespective of the racking (normal setting after START).

VJA^0

The Jacquard selection on the rear remains stationary relative to the front bed, despite of the racking position.

VCIn

Racking function n (n=1-50)
(From Setup2)