Greasing the Linear Guiding
If the lubricating interval for the linear guiding has elapsed, a pictograph appears indicating that the linear guidance has to be greased.
Linear Guiding of the Carriage
|
Linear Guiding of the Carriage | |
| Display of time (by hours) since last lubrication process. |
| Display of traveled distance (by kilometers) since last lubrication process. |
| Display of the previous operating time of the carriage (operating hours counter) |
| Display of the traveled distance of the carriage (kilometer counter) |
| Click this button only if the greasing process actually was performed. In case of insufficient grease, there is the risk of damaging the linear guiding. An irreversible damage of the linear guiding is possible! |
Operating Time Since Last Greasing
Operating Hours
Confirm Greasing the Linear Guiding
မှတ်သား
An irreversible damage of the linear guiding is possible!
In case of insufficient grease, there is the risk of damaging the linear guiding.
- If the Grease linear guidance icon is displayed, the linear guiding must be greased immediately.
- 1
- Remove the carriage assembly panelling (1).
- 2
- Grease the lubricating nipples (2) with a grease gun (Stoll Grease 475)
- 3
- Quantity of grease per lubricating nipple: about 3 - 4 cm3 = press the hand lever three times.
: Use a grease gun with a flexible hose to be able to reach the lubricating point more easily.
- 4
- Repeat this process at the rear carriage support.
The lubricating interval cannot be changed!