Re-knitting of Fabrics

You have three possibilities to call up the ျပန္လည္သိုးေမြးထိုးျခင္း window:

During production

1

In the ေအာ္ဒါ ႀကီးၾကပ္ရန္ window tap the button (arrow)
ေအာ္ဒါ ထုတ္ရန္ -> ေအာ္ဒါ ႀကီးၾကပ္ရန္

2

In the ထုတ္လုပ္မႈကို ေစာင့္ၾကည့္ပါ window tap the button (arrow)
ေအာ္ဒါ ထုတ္ရန္ -> ထုတ္လုပ္မႈကို ေစာင့္ၾကည့္ပါ

After production

The machine has stopped as the piece counter is on zero (ST=0)

3

  1. The message box opens as all fabric pieces were produced.
  2. Tap on the icon အထည္အားလံုး ၿပီးသြားၿပီ.
    The ေအာ္ဒါ လုပ္ၿပီးၿပီ menu appears.
  3. Tap the button ျပန္လည္သိုးေမြးထိုးျခင္း.

The ျပန္လည္သိုးေမြးထိုးျခင္း window will be opened.

1

The currently knitting position (knitting program) is shown in yellow.

2

If you want to select another position, tap the desired position.

3

Quantity of the completed fabrics for this position

4

Total piece quantity for this position

5

Input, how many fabrics need to be re-knitted.

  • When the currently knitting fabric is completed, the fabric to be re-knitted is produced immediately.
    If fabrics need to be re-knitted for several positions, first of all the fabrics for all the positions are re-knitted. Then the production is continued.
  • When displaying the quantity you will see that there are pieces being re-knitted.
    Example, when a piece is re-knitted (+1):

    This display is only active as long as all the pieces are re-knitted.

6

Once a fabric was re-knitted, the number in the column (6) is increased.