Change the settings for the current fabric.
This menu can be used for fine adjustment of a pattern at the knitting machine.
If you have created the pattern without presser foot, for example, and you want to test it with presser foot, then activate the presser foot with this menu.
Note the following points:
- The settings are effective only for the current fabric.
- The settings are not entered in the knitting program.
- When a new fabric is started (START-specification in the knitting program) the specifications of this menu are no longer effective.
|
| If the presser foot is used in the knitting program, this menu item is active. | |
| The presser feet are switched off. | |
| The presser feet are always switched on. | |
Stitch presser foot (Sintral)
|
| If no presser foot is used in the knitting program, then this menu item is active. | |
| The presser feet are switched off. | |
| The presser feet are always switched on. | |
|
|
| Reclaiming is switched off in each knitting system. |
| Reclaiming is switched on in each knitting system.
|
Reclaiming
The stitch length for reclaiming is set in the Setup Editor.