Apply Shape Counter
Use this function only is effective with the following machines:
- Machine without comb take-down
- Machine with comb take-down but without use of comb
In case of a pattern change all the data of the previous pattern is deleted. However, the control saves the values of the shape counters.
For the machine to be able to adjust automatically to the new knitting width (widening or narrowing) it needs the values of the shape counters of the previous pattern.
For doing this, proceed as follows:
- 1
- Activate the Apply shape counter key.
- The machine compares the counter of the previous knitting program with the counter in the new knitting program and can execute accordingly the function "F: FF-Trans":
- 2
- When starting the new knitting program, the machine adjusts itself automatically to the new knitting width.
The condition is that the pattern was created as Fully Fashion knitting program on the M1plus.
Activate the Apply shape counter key.
ေအာ္ဒါ သတ္မွတ္ရန္ -> 
ေအာ္ဒါ တည္းျဖတ္ရန္ -> 
ေရြးခ်ယ္စရာမ်ားကို ဖြင့္ေနသည္
