Deaerate central lubrication

    1
    Stop carriage outside needle bed.
    2
    Loosen vent screw (7) somewhat.
    2. 3
    Swivel central lubrication into mounting position.
    Recommendation: Place a cleaning cloth under the central lubrication, as oil will be fed.
    4
    Activate the ေလ ေမာ္လီက်ဴးမ်ားကို ဖယ္ရွားျခင္း button.
    စက္ကို ျပဳျပင္ထိန္းသိမ္းပါ -> ေခ်ာဆီထိုးျခင္း -> ေလ ေမာ္လီက်ဴးမ်ားကို ဖယ္ရွားျခင္း
  2. The pump feeds oil into the oil line.
    3. 5
    If oil comes out of the hole of the vent screw, switch off the ေလ ေမာ္လီက်ဴးမ်ားကို ဖယ္ရွားျခင္း button.
    6
    Tighten vent screw again (9.5 Nm).
    7
    Repeat the deaeration process on all lubrication units.