Racking

Enter manually the correction values for the racking.

အပ္အေရြ႕ဆိုင္ရာအေျခခံျပင္ဆင္ခ်က္

The position of the rear needle bed relative to the front needle bed is set with the VGK value (factory setting).

If part of the racking device is replaced, e.g. the racking motor or the racking belt, the VGK value has to be set anew.

အပ္မ်ား ဘယ္ညာေရြ႕လ်ားမႈ အေနအထားကို အမွားျပင္ပါ

Fine adjustment of the transfer racking.

The rear needle bed is aligned exactly relative to the front needle bed.

Adjusting racking position correction VPK

ေနာက္ဘက္ အပ္မ်ား ဘယ္ညာေရြ႕လ်ားမႈအတြက္ အေျခခံ အမွားျပင္ခ်က္

With this racking correction the rear additional needle bed is aligned exactly relative to the front needle bed.

ေရွ႕ဘက္ အပ္မ်ား ဘယ္ညာေရြ႕လ်ားမႈအတြက္ အေျခခံ အမွားျပင္ခ်က္

With this racking correction the front additional needle bed is aligned exactly relative to the rear needle bed.

Enter manually the machine data

If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.