Setting: Fabric take-down with fully fashion knitting
With fully fashion knitting, WMN controls the take-down in the fabric. The take-down values within the fabric are automatically adapted to the corresponding fabric width.
Open the Fabric Take-down Table
- You are signed in as Senior Operator
.
- The knitting program is loaded and the production was started.
- In the main navigation bar
Set up Order is selected.
- 1
- Select
Set-up pattern in the bottom navigation bar.
- 2
- In the window tap the button with the
symbol.
- The
WMF menu in the Setup Editor is opened.
- 3
- Change the value.
- 4
- Close Setup Editor with the
Close button and return to
Set-up Pattern.
- The changed values are in Setup and will be stored together with the order when saving it.
- or -
- 5
- In the main navigation bar select
Produce Order.
- 6
- Open
Monitor production in the bottom navigation bar.
- 7
- Tap the button with the
symbol.
- Change the value via the number field.
: The Setup-Editor can also be opened via
Set-up Order /
Prepare machine /
.
Menu:
WMF
![](../Images/png/9292809227__Web.png)
- For working with WMN, all values must be defined in the WMF menu:
- WM min and WM max
- N min and N max
Command WMN
In the WMF1 menu are displayed the corresponding values for the fully fashion piece:
- WM max depends on N max (absolute value)
- WM min depends on N min (absolute value)
Automatic adjustment of the take-down value
The WM values for all other needle widths within the fabric are automatically calculated at the machine.
![](../Images/png/9185155211__Web.png)