Dismantle thread clamping and cutting device

    1
    Remove the screws (5).
  1. Thread clamping and cutting device
    2. 2
    Remove the sensor screw (6).
  2. Sensor screw
    3. 3
    Take the selector housing (3) off the crankcase (1).
    4
    Remove the screws (7).
    5
    Take the finger support (2) off the crankcase (1).
  3. Intermediate plate
    4. 6
    Unscrew the intermediate plate (4) off the crankcase (1) and remove it.