Mounting Control Unit

  1. Allen Key 4mm
  2. Allen Key 5mm
  3. Main switch OFF
  4. Rear panel is open
    1
    Remove the inner cover of the right-hand side.
    2
    Remove the screws of the support of the fabric container.
    3
    Mount the support at the control unit.
    4
    Mount the control unit with the support at the borings in the machine stand.
    5
    Pass the cable to the rear.
    6
    Fix the cables with cable ties.
    7
    Mount the attached inner cover with the opening for the control unit.
    8
    Check its position.