Reworking Stripping Angle

  1. Metal saw or angle grinder
    1
    Press the front stripping angle to the left and remove it from the right guide hole.
    2
    Pull the stripping angle to the right from the guide pin.
    3
    Remove the stripping angle correspondingly.
    4
    Make recesses at the right and left side of the stripping angles.
    5
    Put the stripping angle to the guide pin at the left.
    6
    Press the stripping angle to the left and put it into the right guide hole.
    7
    Mount the stripping angle correspondingly.
    8
    Check the mobility of the stripping angles.