Switching on/off the 40 Volt power supply.
I. Switch off 40 V power supply:
- For mounting work on the carriage part (step motors, selection systems, yarn carrier plungers)
- Switching off and on of the machine is eliminated
- No waiting time until the computer of the machine has shut down and rebooted
If the power supply is switched off, the machine cannot be started with the engaging rod.
- 1
- In the main navigation bar select the main area
Maintain Machine. - 2
- Select
Service in the bottom navigation bar. - 3
- With the
Carriage button, open the Service Functions for the Carriage window. - 4
- With
deactivate the setting 
.
- The function is deactivated
and the button is now displayed in white.
- 5
- With the
OK button return to the previous window. - 6
- Perform the required steps.
II. Switch on 40 V power supply.
- 1
- In the main navigation bar select the main area Maintain Machine.
- 2
- Select Service in the bottom navigation bar.
- 3
- With the Carriage button, open the Service Functions for the Carriage dialog.
- 4
- With activate the setting .
- The function is activated and the button is now displayed in yellow.
- 5
- With the OK button return to the previous window.