Monitor the order with one knitting program

Monitor Order:

An order is set-up and started.
You are signed in as Senior Operator .

1: Tap on Produce Order in the main navigation bar.

2: Tap on Monitor order in the bottom navigation bar.

The window for Monitoring the order is displayed.

No.	Key
1		Name of the order
2		Name of the active knitting program with the machine type designation
3		Display of the production progress (green bar) and running time of the current position (knitting program) Running time of the number of fabrics per position plus fabrics to be re-knitted Date and time of the completion of the number of fabrics per position plus fabrics to be re-knitted
4		Display of the number of fabrics per position (knitting program) n of m n = Number of completed fabrics of the current position m = Total of fabrics to be knitted per position (knitting program) + x = Number of fabrics to be re-knitted of the current position : If several knitting programs are 'running through', the display corresponds to the piece counter for the corresponding active position (knitting programs).
5		Name of the elements of a knitting program Sintral: xxx .sin Jacquard: xxx .jac Setup: xxx .setx
6	No.	Active position number = sequential number of the knitting programs of the order
7		Display of run-throughs (piece counter) n of m n = Quantity of completed run-throughs m = Total of run-throughs to be produced : If a knitting program is 'running through', the display corresponds to the piece counter.
8		Displays the production progress (green area) of the order specifying the completion of the order (date + time).
9		Display of the running time n of m of the order n = Remaining run time m = Total running time
10			Do not stop the machine
10			Stop Machine Open the selection menu with the button: At next Reversal Once the Current Fabric Is Finished
11			Do not switch off machine
11			Switch Off Machine Open the selection menu with the button: With Stop Once the Current Fabric Is Finished Once the Order Is Finished