Additional stitch length correction for the right carriage

Correct the stitch length for the fabric piece of the right carriage:

It may be necessary to change the stitch length of the right carriage if knitting different yarns.

  1. You are signed in as Senior Operator .
  2. A knitting program is loaded.
  3. The production was started.
    1
    In the main navigation bar select Set-up Order.
    2
    Open Prepare Machine in the bottom navigation bar.
    3
    Open the editor with the Setup Editor button.
    4
    Open the window with the Stitch Length button.
    5
    Select the NPR tab.

1

Correction of all stitch cams of the right carriage (with tandem mode without comb only)

: Values valid for all stitch cams

< At the Front

Correction for the front needle bed and carriage stroke to the left

< At the Rear

Correction for the rear needle bed and carriage stroke to the left

> At the Front

Correction for the front needle bed and carriage stroke to the right

> At the Rear

Correction for the rear needle bed and carriage stroke to the right

2

NPxR

  • List of all yarn carriers used by the knitting program for the right carriage

Value

Correction setting for the corresponding yarn carrier

 

    6
    Tap the desired edit box.
  1. Change the value via the number field.
    7
    Exit the window with the  Close button.