Maintenance

In this menu, you set up:

Odsysać

  • Switch on or off the suction of the whole needle bed
  • Number of courses with and without suction (1 course = 2 rows)

This menu point is only available if the suction is switched on.

Vacuum

Clean Selection Systems

  • Carriage direction for cleaning course
  • Quantity of courses till the needle selection systems get cleaned (1 course = 2 rows)

Clean Selection Systems

Smarowniczy

Manual Lubricating

  • Set the quantity of system run-throughs until the next oil lubrication is required.
  • Switch on or off the stop motion depending on whether the machine is to stop after the specified quantity of system run-throughs.
  • Displays the quantity of the remaining system run-throughs until the next oiling of the needle bed.

Lubricating

Adjust central lubrication:

  • Select the operating mode for the automatic lubrication.
  • Set the quantity of system run-throughs until the next oil lubrication is required.
  • Setting of the number of lubrication procedures after which the entire needle bed is to be lubricated.
  • Displays the quantity of the remaining system run-throughs until the next oiling of the needle bed.

Lubricating

Smarowniczy

  • Set the quantity of system run-throughs until the next oil lubrication is required.
  • Switch on or off the stop motion depending on whether the machine is to stop after the specified quantity of system run-throughs.
  • Displays the quantity of the remaining system run-throughs until the next oiling of the needle bed.

Lubricating