Enclose the Weft Yarn by Transfer (CMS-W, Qs)

Yarn Carrier Type Qs

Enclose the weft yarn by transfer
Enclose the weft yarn by transfer

Schematic representation of the knitting situation

The knitting process will be done by four knitting systems
The knitting process will be done by four knitting systems

Create pattern

    1
    Draw basic pattern.
    2
    Define a plating color.
    Open the Plating (1) dialog box.
    2. 3
    For plating color P1, the following specification (2) is necessary:
    Column 1: weft yarn carrier "Qs"
    4
    Draw in the knitting sequence.
    The knitting process of four steps will be executed by four knitting systems:
    (3) - transferring (distributing)
    (4) - inlay weft yarn
    (5) - transferring (enclose weft yarn)
    (6) - knitting

The following settings are required in addition:

Control column

Weft Yarn

Enclosing Row

Sequence of Technical Rows

Icon (4a)

Icon (5a)

Both these rows are done by one carriage stroke.

Presser Foot

—

Switch-on presser foot (5b)

Presser Foot Correction

—

Carriage direction to the left(5c)

Carriage direction to the right(5d)

These settings are not absolutely necessary.

Notice:
The yarn carrier will automatically be moved out of this area if the correction value would cause a collision.