Devices

Overview over the add-on equipment available at this machine.

No new add-on equipment can be signed-in in this window. For this purpose, you must switch off and on again the machine and carry out a Restart & Configuration.

Dostępny pozytywny podawacz po lewo

Release or lock feed wheel

Dostępny pozytywny podawacz po prawo

Release or lock feed wheel

YLC występuje po lewo

The YLC device is present on the machine.

YLC występuje po prawo

The YLC device is present on the machine.

Liczba punktów klemienia i obcinania po lewo

After a machine conversion, inform the control unit about how many clamping/cutting points are available. (6, 8, 16, 16/8)

16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.).

Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.

Liczba punktów klemienia i obcinania po lewo

Release or lock clamping and cutting points

Liczba punktów klemienia i obcinania po prawo

After a machine conversion, inform the control unit about how many clamping/cutting points are available (6, 8, 16, 16/8).

16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.).

Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.

Liczba punktów klemienia i obcinania po prawo

Release or lock clamping and cutting points

Obciąg pomocniczy

The auxiliary take-down is present on the machine.

Obciąg pasowy

The belt take-down is available on the machine.

Centralne smarowanie

Central lubrication is available at the machine.

If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.

Napęd wodzika typ 2

Display of the available yarn carrier drive type.

Grzebień

The comb take-down is available on the machine.

Odsysanie zanieczyszczeń

The suction is available on the machine.