Replace Cable

Replace the cable between CPU and the switch of the rear winding plate.

  1. Main switch OFF
  2. Rear panel is open
    1
    Unplug the XR_168 plug.
    2
    Unplug the male blade terminals B 14/1 and B 14/2 from the micro switch.
    3
    Plug-in the attached cable at the CPU (XR_168).
    4
    Plug-in the male blade terminals B 14/1 and B 14/2 at the micro switch.
    5
    Plug-in the 3-pin plug of the light barrier control unit into the socket.