Changing an order

1

Enter the piece quantity for this position (knitting program).

Tap on this field and enter the piece quantity in the Numărul de panouri tricotate dialog.

BMS machine: A change while production is running is not possible.
Remedy: Suspend production, change the piece quantity for the position, continue production.

2

Enter the quantity of the run-throughs for the entire order.

Increase quantity

Reduce quantity

You can increase or decrease the quantity of run-throughs even if the machine produces.

3

The position (knitting program) is switched on (active), i.e. it is used for the production (default setting).

4

The position (knitting program) is switched off (inactive), i.e. it is not used for the production.

Tap on this field, the icon changes from active to inactive .

5

SIN
JAC
SET

Shows which program sections (.sin, .jac, .setx) are contained in the position.

You can switch on or off these program sections in the Opțiuni de încărcare menu.

SIN "Bold" font, program sections is switched on (active)

JAC - "Normal" font, program sections is switched off (inactive)

Opens the pattern preview for this position.

• Sintral program
• Jacquard program
• Preview graphic of the M1plus
• Open the Setup Editor to make changes
• Modify the Setup file of a non active position (knitting program)
• Info fir (Yarn carrier home position, information on how to thread up the yarn carrier.)

6

Change the order - Shift the position downwards.

7

Change the order - Shift the position upwards.

8

Scroll bar
It is possible to scroll down/up with the scroll bar.

If the order consists of more than four positions (knitting programs) a scroll bar appears automatically.

9

Activate or deactivate Master Setup.

10

Enter order name