New command "Y-RALL(n)" - Do not open the clamp of the yarn carrier

Y-RALL

The clamps of all yarn carriers are opened.

Y-RALL(n, m)

This command is used when not all of the clamps are to be opened, as the threads of individual yarn carriers will be winded around the take-down roller otherwise.

Example: Y-RALL(1A,2A)
All the clamps of the yarn carriers are opened, with the exception of the clamps of the yarn carriers 1A and 2A.

Only when the fabric is below the take-down roller, open the clamp with the command "Y-1A:R" and "Y-2A:R" (entry in the knitting program).