Needle Bed
- Enter manually the position of carriage
- Enter manually the needle selection offset
|
Carriage Position |
Adjusting first and last needle position:
|
|
|
Enter manually the correction values. |
Enter manually the machine data
If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.
- Factory settings
When delivering the knitting machine, the machine data was printed out and put on the right control cabinet.
- Current settings
You will find the values in the Setări de bază menu.
Vizualizare fișier -> 
Informații despre sistem -> 
Setări de bază