Racking

Enter manually the correction values fort the three racking types.

Normal racking

Corecţia de bază a deplasării laterale

The position of the rear needle bed relative to the front needle bed is set with the VGK value (factory setting).

Corecția poziției de deplasare laterală

Fine adjustment of the racking.

The rear needle bed is aligned exactly relative to the front needle bed.

The VPK value changes the position of rear needle bed - a change has effect on all racking positions.

VLn – VRn

You can correct each racking position (n) individually.

Deplasare laterală pentru transfer

Fine adjustment of the transfer racking to the left.

Fine adjustment of the transfer racking to the right.

VLn – VRn

You can correct each transfer racking position (n) individually.

Semideplasarea

VLn – VRn

You can correct each half racking position (n) individually.

Enter manually the machine data

If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.