Lubricating

Lubrifiere manuală

This button is active if the machine is equipped with central lubrication.

Switch on or off the central lubrication.

Active button = The central lubrication is switched off.

If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.

Inactive button = The central lubrication is switched on.

Cicluri de sistem până la procesul de lubrifiere

• Set the quantity of system run-throughs until the next oil lubrication is required (n=1-65535).
• Displays the quantity of the remaining system run-throughs until the next oiling of the needle bed.

Oprire după un număr de cicluri de sistem

Active button = The machine stops after reaching the system run-throughs.
At the display appears the message Lubricate needle bed.

Check the oil collection tank

• Set quantity of days until the next control of the oil collection tank (n=1-180)
• Display of the time (in days) until the next control of the oil collection tank.

Lubrifiere manuală

Active button = The central lubrication is switched off.

If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.

Inactive button = The central lubrication is switched on.

Sistemul central de lubrifiere

Switch on or off the central lubrication.

If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.

If you tap on the icon , you can select one of the following options:

• Prima lubrifiere
• Presetări STOLL
• Setări utilizator

Prima lubrifiere

This setting is used for the initial lubrication of a new machine at the Stoll factory. The values cannot be modified.
Caution: risk of soiling the fabric.

Select this setting for approx. 15 minutes:

• after a thorough cleaning of the needle bed (12 to 26 weeks)
• with a machine, which has been out of operation for a longer period of time
• after a gauge conversion

Presetări STOLL

This setting can be used for production. The values cannot be modified.

Setări utilizator

The following buttons are activated, the values can be modified:

• Lubrifierea zonei de tricotare după
• Lubrifierea întregii fonturi cu ace după

Attention
An improper setting could lead to insufficient oiling. Ensure that the central lubrication applies sufficient oil to the needle bed.

Lubrifierea zonei de tricotare după

Cicluri de sistem

Set the quantity of system run-throughs until the next oil lubrication is required (n=1-65535).

Lubrifierea întregii fonturi cu ace după

Procese de lubrifiere

Setting of the number of lubrication procedures after which the entire needle bed is to be lubricated.

Cicluri de sistem până la procesul de lubrifiere

Displays the quantity of the remaining system run-throughs until the next oiling of the needle bed.