Devices

Overview over the add-on equipment available at this machine.

No new add-on equipment can be signed-in in this window. For this purpose, you must switch off and on again the machine and carry out a Restart & Configuration.

Furnizor de fir stânga disponibil

Release or lock feed wheel

Furnizor de fir dreapta disponibil

Release or lock feed wheel

YLC disponibil stânga

The YLC device is present on the machine.

YLC disponibil dreapta

The YLC device is present on the machine.

Număr puncte de prindere/tăiere stânga

After a machine conversion, inform the control unit about how many clamping/cutting points are available. (6, 8, 16, 16/8)

16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.).

Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.

Număr puncte de prindere/tăiere stânga

Release or lock clamping and cutting points

Număr puncte de prindere/tăiere dreapta

After a machine conversion, inform the control unit about how many clamping/cutting points are available (6, 8, 16, 16/8).

16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.).

Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.

Număr puncte de prindere/tăiere dreapta

Release or lock clamping and cutting points

Tragere auxiliară

The auxiliary take-down is present on the machine.

Tragere cu bandă

The belt take-down is available on the machine.

Sistemul central de lubrifiere

Central lubrication is available at the machine.

If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.

Unitate conducători de fir tip 2

Display of the available yarn carrier drive type.

Pieptene de început

The comb take-down is available on the machine.

Aspirare

The suction is available on the machine.