Pattern design technique on the CREATE PLUS

Patterning of Devoré (1 system)

  1. CREATE PLUS version V2.3. – 10/2022 or higher.
  2. ADF-machine with cam box conversion for Devoré (1 system)
    1
    Open a new pattern.
    2
    Select machine.
    3
    Open the Атрибуты машины tab.
    4
    Select Devoré (1 system) setting in the Функции системы section under Преобразование системы.
  1. In the Функции системы section, the system functions are automatically adjusted.
    2. 5
    Confirm the prompt with ОК.
    6
    Open the Цвета платировки tool window.
    Цвета платировки
    7
    Define a plating color by Цвета нитеводителей.
    Plating Color P1:
    Column A: Yarn carrier color 8 for the binding thread
    Column B: Yarn carrier color 7 for the motif thread
    8
    Allocate the necessary plating index to the yarn carrier colors.
    9
    Draw pattern.
    Watch-out the devoré motif being processed on the rear needle bed.
    Draw with plating color and the following needle actions:
    10
    Enter Петля сзади only.
  2. Resulting "Stitch-Float"
    3. 11
    Enter Motif Thread at Rear and Петля сзади.
  3. Resulting "Stitch-Stitch" for motif thread and binding thread.
  4. Example:
    5. 12
    Entry the Devoré (1 system) rear function in the Системная функция control column.
    13
    Execute Обработка- Техники
    14
    Check the knitting program with the Sintral-Check.

Recommended for Devoré (1 system):