Oil and grease needle bed

The pictographs Nadelbett ölen and Nadelbett schmieren are displayed together.
Start oiling the needle bed elements and then grease the butts of the coupling parts and intermediate sliders.

1

Apply oil with a brush or spray bottle.

1. 

2

Brushes are attached at the side of the needle bed. Put some oil in the upper brush so that the cams near the coupling parts are oiled.

3

Oil the thread clamping and cutting device.

4

Use a brush to apply grease on the butts of the coupling parts and intermediate sliders.

2. 

5

Restarting lubricating interval.