Needle Bed Distance


Needle Bed Distance

Make settings for the Needle Bed Distance

You have the following options in the context menu:

to

Select directly entry 1 to 3 from the Needle Bed Distance tab of the Pattern Parameters .

Pre-defined standard entries
These cannot be deleted or edited.

  • Small (1)
    Approximately the same distance as the standard machine.
  • Medium (2)
    Approximately the same distance as the multi gauge machine.
  • Large (3)
    Approximately the same distance as the k&w machine.

  • Sintral: NBD=n-m
    • n = front needle bed
    • n = rear needle bed
    • Value range: 0.00-10.00 mm
  • Example:
    30 << S:R-0;    Y:0;   NBD=2.20-3.50  S1 S2 S3

et seq.

Select directly an entry from the Needle Bed Distance tab of the Pattern Parameters .

Default

Sets the setting on Default.

Applies the entry of the default setting from the header row.

Удаление

Deletes the entry.

Показать в таблице

Opens the Needle Bed Distance tab of the Pattern Parameters .

There you can make further settings and then apply them to the pattern.

Показать подсказку

  • Show ToolTips