Pattern design technique on the CREATE PLUS

Patterning of Devoré (1 system)

  1. CREATE PLUS version V2.3. – 10/2022 or higher.
  2. ADF-machine with cam box conversion for Devoré (1 sistem)
    1
    Open a new pattern.
    2
    Select machine.
    3
    Open the Makine öznitelikleri tab.
    4
    Select Devoré (1 sistem) setting in the Sistem fonksiyonları section under Sistem Tadilatı.
  1. In the Sistem fonksiyonları section, the system functions are automatically adjusted.
    2. 5
    Confirm the prompt with Tamam.
    6
    Open the Vanize renkleri tool window.
    Vanize renkleri
    7
    Define a plating color by Mekik renkleri.
    Plating Color P1:
    Column A: Yarn carrier color 8 for the binding thread
    Column B: Yarn carrier color 7 for the motif thread
    8
    Allocate the necessary plating index to the yarn carrier colors.
    9
    Draw pattern.
    Watch-out the devoré motif being processed on the rear needle bed.
    Draw with plating color and the following needle actions:
    10
    Enter Arkada ilmek only.
  2. Resulting "Stitch-Float"
    3. 11
    Enter Motif ipliği arka and Arkada ilmek.
  3. Resulting "Stitch-Stitch" for motif thread and binding thread.
  4. Example:
    5. 12
    Entry the Devoré (1 sistem) arka function in the Sistem işlevi control column.
    13
    Execute Teknik işlem
    14
    Check the knitting program with the Sintral Kontrolü.

Recommended for Devoré (1 system):