Import or Export Machine Settings

You can export the machine settings and import them on other machines.

Machine Settings include the following settings:

Carriage Speed

  • Reduced Speed
  • Quantity of knitting rows at reduced speed following a machine stop
  • Speed Outside the Knitting Area
  • Speed with Open Covers

You will find these settings in the menu:

Cấu hình máy -> Hoạt động Cài đặt -> Xe

Various operational settings

  • Time, after which the lighting of the needle beds will be switched off.
  • Horn (ON, OFF, Intermittent Tone)
  • Delayed Switch-off in Case of Power Failure
  • Relieve the Fabric When Switching off the Machine

You will find these settings in the menu:

Cấu hình máy -> Hoạt động Cài đặt -> Linh tinh

Vacuum

  • Vacuum Off Whole Needle Bed
  • Number of courses without suction
  • Number of courses with suction

You will find these settings in the menu:

Cấu hình máy -> Bảo trì -> Máy hút

Clean Selection Systems

  • Direction of Cleaning Row
  • Number of courses until the selection systems are cleaned

You will find these settings in the menu:

Cấu hình máy -> Bảo trì ->

Manual Lubricating or Central Lubrication

  • Manual Lubricating
    • Quantity of system run-throughs after which the needle bed should be manually oiled
    • Machine stop after the maximum quantity of system run-throughs is reached
  • Central lubrication
    • Quantity of system run-throughs until oiling the knitting area
    • Quantity of system run-throughs until oiling the complete needle bed

You will find these settings in the menu:

Cấu hình máy -> Bảo trì -> Bôi trơn

Proceed as follows:

    1
    Make machine settings at a machine.
    2
    Export the machine settings.
    3
    Import the machine settings on the other machines.
    4
    All machines are working with the same machine settings.

Cấu hình máy -> Cài đặt Hệ thống
-> Dữ liệu Chuyển giao -> Cài Đặt Máy

The machine settings are exported with the following file name:
machinesettings.xml