Stitch cams positions (NP) raised to 500[Outdated translation - Switch to English or German]

The maximum number has been raised from 250 to 500.

You need the following version on the pattern preparation unit to be able to use this:

• M1plus: V 7.4.036 (or higher).
  The higher stitch cam positions (NP251 - NP500) can only be selected in the Setup editor.
  Use the higher stitch cam positions (NP251 - NP500), insert them manually in the Sintralprogram.
• CREATE: V 2.1.6 (or higher)