Central Lubrication

Starting from 06/2023, the CMS machines are equipped with a central lubrication as a standard equipment (not with CMS 703, CMS 503, CMS 502, CMS 303, CMS 202).

Central lubrication on carriage, on the right: Oil supply
Central lubrication on carriage, on the right: Oil supply

The central lubrication lubricates with oil the working butts of all needle bed elements including the selection jack:
Holding-down jack, coupling part, intermediate slider (2 working butts), and selection jack (2 working butts).

Lubrication points of the central lubrication
Lubrication points of the central lubrication

The oil pump can be found either on the left or on the right machine side depending on the machine type.

Notes:

  1. Adjust central lubrication
    Path: Cấu hình máy -> Bảo trì -> Bôi trơn
    -> Trung tâm bôi trơn
  2. Refill oil
    If the content level is undershot then the Central lubrication oil reservoir almost empty message appears.
    Refill oil until the "Max" mark has been reached.
  3. We recommend to oil the butts of the coupling parts and intermediate sliders even when the machine is equipped with central lubrication.