Changes in version 1.1

The most important changes in this version:

• New shaped selvedge counters #L1, #L2 to #R2 (Chapter Fully fashion knitting and chapter Counters)
• Command PSC: Open/close the holding-down jacks on CMS 330 TC-C (chapter Holding-down jacks on CMS 330 TC-C)

Supplements and corrections:

• Command NCC: The command may only be used for machines with clamping/cutting bed (chapter Clamping and cutting)
• Command NCC: The specification NCC5 in the example is wrong, the correct one is NCC=5 (chapter Clamping and cutting)
• Command MSECNPJ: The maximum speed is not 1.0, but 1.2 (chapter Speed specifications )