Stitch cam settings / stitch lengths

NP n = m.mm ¹

Stitch cam position n (1-500) is set to stitch tension m, e.g. NP1=12.5
Step width: 0.1
starting with OKC: Step width: 0.05

NP x-y

Indirect specification of the stitch cam position for all systems (x= front, y= rear) x, y= 1-500, J1-J8,
e.g. NP4-4, NP4, NP-4, NPJ1-J8, NP#3-#4

NPR: <<k-l>>m-n ;

Correction of the stitch cam position for the right carriage (only for tandem operation, "Clamping and cutting" function out of action)
- = separates between the front and rear systems
k,l,m,n = correction value -2.0 .. 2.0. Step width: 0.1.
starting with OKC: Step width: 0.05
>>, << = carriage direction

S:A(n)-Y(m);

Indirect specification of stitch tension (n, m = 1-500, J1-J8)

S:A(8.5)-Y(9.0);

Direct specification of the stitch tension

NPJn:...;

Jacquard controlled stitch cam position n (1-8). Symbol "." must always be specified.
Specification with "=": The tension change is equally distributed among both tension ranges.
e.g. NPJ1:.=11.0 A=13.0 Y=12.2;
Specification with "!": The area indicated with "!" remains unchanged.
The stitch tension change is carried out in the adjacent area.
e.g. NPJ1:.=11.0 A!13.0 Y=12.2;
Areas with "!" may not be adjacent in the fabric. Tension assignment for a maximum of 35 Jacquard symbols

S:A(J1)-Y(J2);

Knitting specification with stitch tension setting according to NPJ1 front and NPJ2 rear

PANP:...;

Pattern arrangement for stitch cam positions

PANP<...>:;

Pattern arrangement for stitch cam positions with NPJ. Different stitch tensions can be specified on the left and right fabric selvedges

PMNP:...;

Pattern pack on the machine/stitch cam positions