Yarn Length Control (YLC, STIXX, ASCON)

YLC MM

Working with mm

• Measuring in NP areas to determine the basic conditions (REC MM)
• Control with the correction values of the basic conditions in order to produce the fabrics (YLC MM)
• Measuring and controlling depends on carriage direction.
• This operating mode combines the YLC3, YLC4 and YLC8 modes.

YLC MP

Working with original fabric (Master Piece)

• Measuring in original fabric to determine the basic conditions (REC MP)
• Control with the correction values of the basic conditions in order to produce the fabric (YLC MP)
• This operating mode combines the YLC5 and YLC6 modes.

YLC1

Measurement and control, depending on the carriage direction (also possible: STIXX1)

YLC2

Special knitting program for adjusting the stitch cams (also possible: STIXX2)

YLC3

Measuring in test fabric for mode 1, 7 or 8 (also possible: STIXX3)

YLC4

Measuring + Determining correction values (also possible: STIXX4)

YLC5

Measuring in original fabric for mode 6 (also possible: STIXX5)

YLC6

Control with the correction values from mode 5 (also possible: STIXX6)

YLC7

Measurement and control, independent of carriage direction (also possible: STIXX7)

YLC8

Measurement and control, depending on carriage direction and knitting system (also possible: STIXX8)

YLC0 ¹

Switch off (neither measure nor control) (also possible: STIXX0)

YLC-

Interrupt the control for one carriage stroke (also possible: STIXX-)

YLC(-…YLC-)

Deactivate control in one area
Start: YLC(-
End: YLC-)

YLCDEV: x-y;

Transfer the correction values from yarn carrier (measuring wheel) x to yarn carrier y. Up to 4 transfers can be specified per carriage stroke.
Example: YLCDEV:3-6 3-5 2-4 1-7
(also possible: STIXXDEV:x-y;)