Counters with CMS 822 HP
I. Operating mode: Narrow coupling (4 systems)
- Without comb and clamping / cutting
- Single Piece: Working with all 4 systems in one SEN area
- Multi-piece: Working with all four systems in several SEN areas (1-4).
- With comb and clamping / cutting
- Single Piece: Working with all 4 systems in one SEN area.
- double-piece: Processing 2 pieces with all 4 systems in one SEN area.
If the the fabric is worked as fully fashion with narrow coupling, counters will be used as well.
II. Operating mode: Tandem machine without comb and clamping / cutting:
- Processing one piece per carriage
- Processing up to a maximum of 4 pieces per carriage
The information of the knitting program will be transferred from the left carriage to the right carriage.
III. Operating mode: Tandem machine with comb and clamping / cutting:
|
| Counters | Function |
|---|---|---|
Left fabric | # L1 | Selvedge counter for the left fabric selvedge |
# R1 | Selvedge counter for the left fabric selvedge | |
# LM1 | Selvedge counter for the left side in the center | |
# RM1 | Selvedge counter for the right-hand side in the center | |
# 55 | Start-width at the left | |
# 56 | Start-width at the right | |
# 57 | Start-width middle-left | |
# 58 | Start-width middle-right | |
Right piece | # L2 | Selvedge counter for the left fabric selvedge |
# R2 | Selvedge counter for the left fabric selvedge | |
# LM2 | Selvedge counter for the left side in the center | |
# RM2 | Selvedge counter for the right-hand side in the center | |
# 59 | Start-width at the left | |
# 60 | Start-width at the right | |
# 61 | Start-width middle-left | |
# 62 | Start-width middle-right |