Apply shape counters with operating modes without comb

With pattern changes - Apply shape counters:

Use this function only is effective with the following machines:

The machine compares automatically the shape counters (old-new) in order to e able to adjust the new knitting width (widening or narrowing) with the pattern change. The values of the shape counters of the previous pattern are necessary for this.

The condition is that the pattern was created as Fully Fashion knitting program on the M1plus.

Set shape counters manually:

  1. You are signed in as Senior Operator .
  2. A knitting program is loaded and the production was started.
  3. In the main navigation bar Set up Order is selected.
    1
    Select Prepare Machine in the bottom navigation bar.
    2
    Tap the button.
    3
    Open the menu with the Shape Counters Absolute button.
  1. The menu for entering the values for the counters #L and #R is displayed:

 

    4
    Under Absolute (needle bed), enter the values for the counters #L and #R read from the needle bed.
  1. The machine compares the counter of the previous knitting program with the counter in the new knitting program and can execute accordingly the function F: FF-Trans.